CBX400/550 Message Board

Arvchived articles in reverse order. You can post message from Top page.
[ Prev ] [ Top ] [ Next ] This page contains from #1410 to #1381. (reverse order)

Date: Mon Jan 18 00:50:45 2010
Name: Avelino Barrosa
Type: CBX 400F
I'm looking for a CDI type TID14-09 MA6 201 for my Honda CBX 400F.
If anyone has this part please advise with price.
Mannt thanks from Portugal

Date: Sat Jan  9 11:05:13 2010
Name: Charlie
Email: czarekj@hotmail.com
Type: CBX 550F2 (Integra)
I just got one and I'm in the process of restoration. I'm having difficult time finding parts for it. The problem is that the part numbers are no where to be found! Can some one sell me the cbx550F honda parts catalogue?

I'm also looking for the japanese tail light. I like that this design incorporates turn signals in the tail light.
Should you have one for sale, please contact me.
Should you have any spare new honda parts, please let know.
Charlie


Date: Mon Nov  9 11:22:26 2009
Name: Jason
Email: js.hunter@sympatico.ca
Type: CBX 550F
I have a 1983 CBX 550 F, for sale.

Great parts bike or easy to get back on the road. Needs one new crank bearing. Already apart. Had it on my bench for 10 years probably never going to get to it.

12,000 original kms. I am in Canada.

Date: Fri Oct 23 10:47:09 2009
Name: yaima abreu
Email: lorely81@hotmail.com
Type: CBX 550F
hi I'm looking for the starte of the cbx550F 1981 to 1986..please contact me at lorely81@hotmail.com or directly to my cel at 786-486-7923..........thank you yaima

Date: Mon Oct  5 05:54:32 2009
Name: mandy
Email: peopleunifyingpublic@gmail.com
Type: CBX 550F
im looking for a starter for my cbx 550f.. will buy the whole motor if need be

Date: Wed Sep 23 05:14:00 2009
Name: Aiwe Stasskiy
Email: asdus@mail.ru
Type: Others
Hi all!
I'm have CBR400F2 NC17 frame and broken NC07E engine.
Anyone know alternative engines, that can fit in NC17 frame with minimum remakes?
If u know, please write here or to asdus@mail.ru
Thank you very much!

Date: Sun Sep 13 03:43:50 2009
Name: Bill Thompson
Email: billt@live.ie
Type: CBX 550F2 (Integra)
Hi I am looking for a starter motor for my cbx550 itd 1985 I am doing it up but when I bought it it had the wrong starter motor on it and it leaks oil(runs fine but messy in the driveway)I am living in Ireland and cannot find one over here can anyone help thanks Bill

Date: Wed Sep  9 11:42:42 2009
Name: billa
Email: peopleunifyingpublic@gmail.com
i want to buy a honda cbx 550f .. or parts. email me please for anything

Date: Mon Sep  7 12:30:23 2009
Name: 
Hi Bill ,

I have a set of CBX550 forks $50. plus shipping from Canada .
Rear lens assembly $20. plus shipping .

Date: Sun Sep  6 09:41:57 2009
Name: 
Email: carlmars   at  sympatico.ca
I'm breaking a CBX550 for parts , anything is available - cheap - I'm not looking to make a fortune out of it , I just bought it for the 4 into 1 on it .

Shipping at cost from Quebec city Canada .

Ben

carlmars at sympatico.ca

Date: Thu Aug 27 23:29:00 2009
Name: Lance Mccluskey
Type: CBX 400 Custom
Hi , I have a 1985 CBX400 Custom. 15,000 Kms. I am 3rd owner, 2nd bought from a Honda dealer In Truro NS, Canada, who is said to have imported it from Japan. I have been looking for User/Shop manual without success. Any info would be very much appreciated. Thanks, Lance.

Date: Tue Aug  4 06:02:31 2009
Name: bill
Type: CBX 550F
does anyone have forks for a honda 550 cbx 1982 for sale?
if so, please give details
thanks

Date: Sun Aug  2 15:04:09 2009
Name: Jack
Type: CBX 550F
Hey Billy!
If you're going to chop your bike why don't you sell me your tail light lens!

Date: Sun Aug  2 14:59:08 2009
Name: Jack
Type: CBX 550F
Looking for a tail light lens for a 1983 honda cbx 550f, if you can help me, please contact me.

Date: Tue Jul 28 17:59:56 2009
Name: Giuseppe
Type: CBX 400F2 (Integra)
Ho bisogno dei gommini del freno anteriore.
Grazie.

Date: Sun Jun 14 14:46:26 2009
Name: Don
Email: kennett6060@shaw.ca
Type: CBX 550F
1983 CBX 550 F Red and white 27 000 kn original owner

I am having a problem getting the bike started. When I do get it running, its ok for a day so. If it sits idle for a couple of days the battery goes dead. The battery holds a charge if I disconnect it.

I now have the bike running but it backfires about every two minutes and has no power or acceleration.

The repair shop looked for an electrical problem but couldn't seem to find one

The bike only has 27 000 km on it. It is in pretty good shape. The Hindle 4:1 replacement pipes are a bit rusty

Any ideas or suggestions? Thanks

kennett6060@shaw.ca




Date: Sun Jun 14 14:45:56 2009
Name: 
Type: CBX 550F
1983 CBX 550 F Red and white 27 000 kn original owner

I am having a problem getting the bike started. When I do get it running, its ok for a day so. If it sits idle for a couple of days the battery goes dead. The battery holds a charge if I disconnect it.

I now have the bike running but it backfires about every two minutes and has no power or acceleration.

The repair shop looked for an electrical problem but couldn't seem to find one

The bike only has 27 000 km on it. It is in pretty good shape. The Hindle 4:1 replacement pipes are a bit rusty

Any ideas or suggestions? Thanks

kennett6060@shaw.ca




Date: Tue May 26 12:12:15 2009
Name: tom
Email: d4garden@tels.net
Type: CBX 550F
how do you adjust the float level
the float is all plastic
the book says to bend the tab
if I do that I will break it

Date: Wed May  6 19:54:21 2009
Name: Billy Shannon
Email: play@artbilly.com
Type: CBX 550F
I have started a CBX550 forum
http://groups.yahoo.com/group/cbx550
Please join and add your knowledge, stories and photos..

I will have to approve members, to avoid spam...

Thanks
Billy

Date: Tue Apr 28 00:04:31 2009
Name: paul
Email: paul.pocock@talktalk.net
Type: CBX 550F
blue 1985...]
Hi does anyone know where to get speedo driver for above by any chance, regards from paul

Date: Mon Apr 13 18:04:06 2009
Name: Billy
Type: CBX 550F
Hey there

I am chopping my CBX550 and I was hoping to find a parts list somewhere.. Has anyone had any luck with that??

Also any other forums out there?

Cheers

BTW What's with all the spam??

Date: Thu Mar 26 01:24:46 2009
Name: Ross
Email: ross@ifpi.org
Type: CBX 400 Custom
does anyone have or know where i get hold of a manual or wiring diagram for a cbx400c?

Date: Tue Mar 24 09:24:00 2009
Name: Yutaka Yasuda
Email: yasuda@bakkers.gr.jp
Type: CBX 400F2 (Integra)
Hi Ian,
How about David Silver Spares in UK?


Date: Fri Feb 27 20:46:16 2009
Name: Ian gouza
Email: s207062804@nmmu.ac.za
Type: CBX 550F
Hi Guys
I have a cbx550f that smokes from the exhaust and has a cam chain rattle. if any one knows where i can get hold of a gasket set along with the other bits needed to get my bike back to working order, please let me know.

Date: Wed Jan 21 20:35:00 2009
Name: kobie knoesen
Email: kobiek@ananzi.co.za
Type: Other CBX
hi bikers, I'd like to know how much fork oil does the front forks of the cbx 1000 6 cyl take pls I'd appreciate it cause this bike is my baby thanks.
Kobie

Date: Wed Jan 21 14:32:32 2009
Name: かずき
はじめまして日本在住のカズキですあなたの国ではCBX400や550は売っていますか?

Date: Sun Jan 11 22:14:27 2009
Name: sandro
Email: rorice2001@yahoo.it
Type: CBX 550F2 (Integra)
Hello,I'm looking for a particular spare part for my CBX 550: is the spring of the tensioner, part. no. 14514-MA6-000. It seems to be not available here in Italy, does some know if there is some place in the world where it is possible to find it?
Thanks

Date: Tue Jan  6 22:55:29 2009
Name: Simon
Email: theslumfa@hotmail.co.uk
Type: CBX 550F
Well it looks like im the only one posting for 4 yrs lol.
Hello to whoever is reading this.
I have a cbx550 f2-D 1983.
I am wanting cam chain tensioner and blades.
Love my cbx, shame it loves chewing cam chain tensioners.
Thx

Date: Fri Nov 28 15:46:59 2008
Name: Phil
Email: fishman_Phil@xtra.co.nz
Type: CBX 400F
Can anyone help me find a set of Tank and Side Cover Decals for my 1983 CBX400F. Tank colour is red.
Cheers ... Phil


Date: Mon Nov  3 01:35:49 2008
Name: kevin
Type: CBX 550F
Hi,I came across this message board by accident,in 1998 i work in Zimbabwe and within a few months of arriving in country i needed transport and came a cross a 85 cbx550 with 15000 kilometers on the clock,a beauty in red and white,having only ridden cb250"s befor i thourght the cbx was HUGE,and the first ride from Harare to Bulawayo,450 km was a nerve rakker,so to cut to the chase,in the next 4 years we together we coverd over 100,000 km"s with only one droped cam chain tensioner(it still got me home on new years eve 120 km).an abandond front mudgard in Springbock,RSA as the wheel bearings failed and had to be removed to get me to the next town.A few modifications,extra lights for night riding and a moving the ignition barrel to prevent the keys being snatched at lights on a tour from Mozambique round the cape back up to Namibia.
Back in The UK "Hendry" is still under a cover in Hillside Bulawayo with an intension to get back on the road on a visit to Zim next July.
I just wanted to post this to let others know what a sound bike the CBX is,on recolection the vented front disk needed a little care but that was about it,in a developing country an easy bike to keep going and always gatherd a crowd at petrol stops.
The dream would be to ride north from Zimbabwe as far as possible back to the UK but this would be just a dream.
Thanks for reading my ramblings.
Ride safe.
Kevin.


[ Prev ] [ Top ] [ Next ]
[Back]